Need help?Do you have a question about the Xtant 1001DX and is the answer not in the manual?
Specifies minimum wire gauge requirements for power, ground, remote turn-on, and speaker cables.
Advises on fuse placement at the battery and calculating fuse values for multi-amp systems.
Warning against installing amplifiers in environments prone to moisture or water exposure.
Includes a standard 12/24 dB per octave Butterworth crossover with selectable frequencies via SIP modules.
General| Channels | 1 |
|---|---|
| Frequency Response | 20Hz - 250Hz |
| Power Output | 1000W |
| RMS Power at 4 Ohms | 500W |
| Bass Boost | 0dB - 18dB |
| THD | <0.05% |
To Next Page
