Need help?Do you have a question about the Xtant 604X and is the answer not in the manual?
Information for professional installers regarding installation techniques and system design.
Details minimum wire gauge requirements for power, ground, remote turn-on, and speaker cables.
Explains the necessity of an outboard 120 amp fuse for safety and proper system protection.
Advises installing amplifiers in locations free from moisture or exposure to water to prevent damage.
Overviews key features including cooling, power supply, crossover, noise gate, and protection.
Details the PQM-1, a precision tuning instrument for adjustable one-band parametric equalization.
Describes the LFQ45 module for adding bass impact with adjustable boost at a center frequency.
Introduces the RGM 1 for remote gain control of subwoofer or stereo channels, offering up to 15dB adjustment.
Provides instructions for cleaning the internal fan and circuit board every 30 or 90 days.
Details procedures for cleaning the stainless steel cover and polishing, avoiding liquid on circuit boards.
To Next Page
General
