Need help?Do you have a question about the Xtant 2200ix and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Input Sensitivity | 200mV - 4V |
| RMS Power at 4 Ohms | 110W x 2 |
| THD at Rated Power | <0.05% |
| Signal to Noise Ratio | >100dB |
| Damping Factor | >200 |
| Crossover Slope | 12dB/octave |
| Bass Boost | 0-18dB @ 45 Hz |
| Frequency Response | 10Hz - 30kHz (±1dB) |
Installer's Reference insert for professional installers, covering installation techniques and system design concepts.
Specifies minimum wire gauge requirements for power, ground, remote turn-on, and speaker cables.
Recommends installing a fuse at the battery positive terminal and for multi-amp systems.
Advises installing amplifiers and accessories in a location free of moisture or exposure to water.
Details key features like cooling, power supply, crossover, noise gate, input types, expansion port, protection, and status LEDs.
Precision tuning instrument for adjustable frequency, Q/bandwidth, and gain controls.
Upgrades crossovers with a 24 dB per octave "Linkwitz - Riley" filter for improved response.
Details cleaning the internal fan and circuit board using a soft brush or low-pressure air.
Outlines cleaning the stainless steel cover with dust cloths and ammonia-free cleaner.
Outlines the commitment to customer satisfaction and minimizing product downtime.
To Next Page
