Need help?Do you have a question about the Xtant Model 603x and is the answer not in the manual?
Details minimum wire gauge requirements for Power, Ground, Remote Turn-On, and Speaker cables.
Specifies the need for an outboard 100 amp fuse and in-line fuse for the power wire.
Instruction to install amplifiers in a location free of moisture or exposure to water.
Describes the forced convection cooling system with an on-board thermal sensing circuit for temperature regulation.
Explains the fully regulated Pulse Width Modulated power supply for high efficiency and reliability.
Details the 12 dB/24dB filter network with selectable modes and frequency selection via SIP modules.
To Next Page
General
