OPTIONAL ACCESSORY MODULES
Xtant optional accessory modules are easily and quickly
installable by your Authorized Xtant Dealer. The upgrade mod-
ules snap into place on the amplifiers PC board when the top of the unit is
removed. These accessories enhance your entire system, expanding and cus-
tomizing performance for your unique applications.
PARAMETRIC EQUALIZATION MODULE – PQM 1
The PQM-1 is a precision tuning instrument, designed to be
adjusted with the use of a Real-Time-Analyzer. This true,
fully adjustable, one band parametric equalizer provides
individual frequency, Q/bandwidth, and +/- 18dB gain adjust-
ment controls. By utilizing one of three (3) frequency modules included, any
frequency from 20 Hz to 20kHz can be chosen. The “Q” ranges from 1 to 10
in value, allowing a wide variety of bandwidth adjustment to address the
subtle tuning requirements common to mobile audio systems. All 2-channel
Xtant amplifiers can accept one PQM-1. All 3/4-channel amplifiers will
accept two PQM-1 modules if desired (one PQM-1 per 2 channels of input).
24 DB / OCTA
VE CROSSOVER MODULE – CM 24X
The CM-24X upgrades the standard on-board crossovers
provided on all Xtant “ix” and “x” Series amplifiers to a 24
dB per octave “Linkwitz - Riley” filter. The CM-24x module
improves loudspeaker polar response while its steeper slope
provides enhanced system design flexibility.
BALANCED LINE MODULE – BLM 1
The BLM-1 upgrades all Xtant “x” Series amplifiers to include
Balanced / Floating Line Inputs, which are standard on all
“i” series products. The BLM-1 does not create balanced
line outputs for the standard, on-board crossover.
However, in most cases, the noise elimination benefits of
balanced lines will be passed through to amplifier(s) con-
nected to these outputs.
8
To Next Page
Loading...
