OWNER’S INSTALLATION LOG
Upon installation of your mobile audio sound system, your
Authorized Xtant Select Dealer will complete this log. Keep this
owner’s manual with your vehicle as a reference for all amplifier
settings.
owner’s name:
Vehicle: year:
xtant amplifier serial no.
input sensitivity
(CIRCLE SETTING)
Front Inputs Rear Inputs
–20 dB –10 dB 0 dB +10 dB +20 dB –20 dB –10 dB 0 dB +10 dB +20 dB
Front Crossover Rear crossover
CIRCLE JUMPER SETTING
: CIRCLE JUMPER SETTING:
Amplifier: Amplifier:
byp high low byp high low
rca outputs rca outputs
byp high low byp high low
frequency value frequency value
SIP High Pass FQ SIP High Pass FQ
sip low pass FQ sip low pass FQ
output gain adjustment noise gate adjustment
switch: on off
threshold position
(DRAW ARROW POSITION)(DRAW ARROW POSITION)
Accessory modules (CIRCLE SETTING)
CM 24X front rear pqm-1 (FRONT) yes no
yes no yes no pqm-1 chip frequency
BLM-1
front rear pqm-1 (REAR) yes no
yes no yes no pqm-1 chip frequency
Xtant Select Dealer
phone: date installed:
installation specialist:
To Previous Page
Loading...
