Xterra FB360 User Manual

12
1. Remove the pre-installed 4 Screw Sets (12) from the Handlebar Tube (04).
2. Connect the middle sensor wire (19) to the wire on the back of the console (08).
3. Insert the Handlebar Tube (04) to the Rear Support Tube (02), secure with the 4 Screw Sets (12).
Please insert two ‘’AAA” batteries (not included) at the back of the console.
Pre-assembled on rear support tube:
4 screw set (#12)

Xterra FB360 Specifications

General

Brand	Xterra
Model	FB360
Category	Exercise Bike
Language	English