Xterra FB360 - Step 3 Seat

9
1. Remove 3 flat washers (16) and 3 nylon nuts (17) underneath the seat (07). Attach the seat (07) to the
seat support tube (03), tighten with 3 flat washers (16) and 3 nylon nuts (17).
2. Insert the seat support tube (03) to the front support tube (01), fasten with the adjustment knob (10).
1 Adjustment Knob (#10)
Pre-assembled on seat:
3 Flat Washers (#16)
3 Nylon Nuts (#17)