Xterra FB360 - Step 4 Back Cushion

10
STEP 4 Back Cushion
1. Attach the lower back support tube (74) to the upper back support tube (03), tighten using 2 nylon nuts
(17), 2 flat washers (55) and 2 carriage bolts (78).
2. Attach the back cushion (77) onto the upper back support tube (75), tighten using 4 spring washers (84)
and 4 Allen screws (80).
2 Nylon Nuts (#17)
2 Flat Washers (#55)
2 Carriage Bolts (#78)
4 Allen Screws (#80)
4 Spring Washers (#84)