Xterra FS2.5 - Right Swing Arm Assembly; Attach Right Swing Arm; Attach Handlebar Cover and Swing Arm Axle

6
FS2.5 Elliptical
#43. 5/16” x 3/4”
Button Head Socket
Bolt (1 pc)
#55. 5/16”
Nyloc Nut (2 pcs)
#56. 5/16” x 1-3/4”
Button Head Socket
Bolt (2 pcs)
#100. 8.5 x 23 x 1.5T
Flat Washer (1 pc)
Right Swing Arm
2
Hardware Step 2
1. Locate the Right Swing Arm (Upper) (8) and slide it through the Swing
Arm Bushing (23); secure it to the Lower swing arm (6) with two Button
Head Socket Bolts (56) and two Nyloc Nuts (55). Tighten using M5 Allen
Wrench (68)
2. Slide the Swing Arm Axle (22) through the console mast bushings, then
through the Handle Bar Cover (78) and Lower swing arm (6). Attach with
one Button Head Socket Bolt (43) and one Flat Washer (100). Tighten
using the M5 Allen Wrenches (68).