Xterra FS3.0 - FS3.0 Assembly Instructions; Hardware Checklist: Steps 1 & 2

FS3.0 Elliptical
3
#100. 8.5 x 23 x 1.5T
Flat Washer
(1 pc)
#43. 5/16” x 3/4”
Button Head Socket
Bolt (1 pc)
FS3.0 Assembly Pack Checklist
Hardware Step 1
#44. 5/16”
Flat Washer
(8 pcs)
#43. 5/16” x 3/4”
Button Head Socket
Bolt (4 pcs)
Hardware Step 2
#45. 5/16”
Curved Washer
(1 pc)
#53. M5 x 12mm
Phillips Head
Screw (4 pcs)
#102. 5/16” x 3/4”
Socket Head Cap
Bolt (9 pcs)
#46. 5/16”
Split Washer
(9 pcs)
#55. 5/16”
Nyloc Nut
(2 pcs)
#56. 5/16” x 1-3/4”
Button Head Socket
Bolt (2 pcs)