FS4.0e Elliptical
11
Operation of Your Console
FS4.0e Console
Power Up
The Elliptical is supplied with an external power supply. When power is connected to the Ellip-
tical, the console will automatically power up. If there is no input to the console for 20 minutes
the console will go to stand-by mode. In stand-by mode the console display will turn off. To
turn the console on press any key.
When initially powered on the console will perform an internal self-test. During this time all
the lights will turn on. When the lights go off the dot matrix display will show a software ver-
sion (i.e.: VER 1.0) and the message window will display an odometer reading. The odometer
reading displays how many hours the elliptical has been used and how many virtual miles
the elliptical has gone. The time in hours will be to the left and the odometer in miles will be
displayed to the right.
The odometer will remain displayed for only a few seconds, then the console will go to the
start up display. The dot matrix display will be scrolling through the different workout proles
of the programs and the message window will be scrolling the start up message. You may
now begin to use the console.
Convenient cargo
compartment for
phone or MP3 player
Easy-Touch
Control Keys
Integrated Speakers
for MP3 Player
Audio Input Jack
for customized
listening
LCD with
workout data
To Next Page
Loading...
Need help?
General
