Xterra SB120 - Seat Assembly

12
SB120 Recumbent Bike
Assembling the Seat
4
1. Remove the pre-installed 2 Allen Bolts (No. 20) and 2 Flat Washers (No. 34)
from Connection Axle (No. 09).
2. Insert the Adjustable Bar (No. 08) into Connection Axle (No. 09) as shown
above, then tighten with 2 Allen Bolts (No. 20) and 2 Flat Washers (No. 34).
3. Attach the Seat (No. 25) to Backrest Support Bracket (No. 03) and tighten with
4 Allen Screws (No. 32).
32 4pcs M8 x 15L
73
03
09
20
34
08
08
34
20
09
03
25
32
Allen Key