customerservice@dyaco.ca
DyacoCanadaInc2020
18
TROUBLESHOOTING
Problem Cause Solution
Monitor does not display
Adapter not plugged in Plug adapter in
Computer Wires not connected
Ensure the computer wires are
connected properly at the upright
and computer
No speed or distance displays
on the monitor
Sensor wire not connected
Ensure the computer wires are
connected properly at the upright
and the computer
Sensor wire not working properly Replace sensor wire
Monitor not working properly Replace monitor
No tension
Magnetic wheel not working properly Replace magnetic wheel
Computer wires not connected
properly
Ensure the computer wires are
connected
properly at the upright and
the computer
Heart rate not displaying
Pulse wire not connected Secure plug wires together
Hand pulse defective Replace hand pulse grip
Monitor not working Replace Monitor
Grinding Noise
Crank bearing defective Replace crank bearings
Idler pulley defective Replace idler pulley
Flywheel defective Replace flywheel
Squealing V-belt slipping Adjust v-belt
To Next Page
Loading...
Need help?
General
