EasyManuals Logo

Xterra UB120 User Manual

Xterra UB120
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
customerservice@dyaco.ca
DyacoCanadaInc2020
13
USER DIRECTION
HOW TO ADJUST THE SEAT
The correct height for the seat can be adjusted by the
club knob.You need to unscrew the club knob and
lift or lower the seat height at your desired position,
and then tighten the club knob.
HOW TO ADJUST THE PEDAL STRAPS
To adjust the pedal straps, first pull the
ends of the straps off the tabs on the pedals.
Adjust the straps to the desired position, and
then press the ends of the straps onto the
tabs.
HOW TO MOVE THE BIKE
The bike has a pair of Transportation wheels
on the Front Stabilizer. To move, carefully hold
and tilt the handle toward to front and then roll.
GENERAL MAINTENANCE
The safety of this product can be maintained only if regular periodic checks are made. Most
checks can be performed once a week. However, some checks should be made before each
workout, and are indicated as such below.
Checks
• Check that seat nuts are secure, check before each workout.
• Check that pedals are tight; pedals can work loose over time.
• Check that stabilizer bolts are tight, check before each workout.
• Check that handlebar is secure, if not, tighten, check before each workout.
• Should a part become defective, replace it immediately. Do not allow use of the equipment
until it has been repaired.
Cleaning
A damp cloth is sufficient to clean most surfaces of this unit. Be careful not to drip water on the
monitor. A mild liquid soap may be added if needed.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xterra UB120 and is the answer not in the manual?

Xterra UB120 Specifications

General IconGeneral
BrandXterra
ModelUB120
CategoryExercise Bike
LanguageEnglish

Related product manuals