Xtool D1 User Manual

(2) Put the timing pulley through the timing belt, and then tighten the screws on the coupling.
1.Because the bearing is shallow, please check whether it is inserted steadily to avoid the
possibility of displacement collapse during the work.
2.Check whether the coupling screws are tightened

Xtool D1 Specifications

General

Working Current	5A
Laser Power	10W
Engraving Speed	10000mm/min
Supported Materials	Wood, Leather, Paper, Plastic
Software Compatibility	LightBurn
Connectivity	USB, Wi-Fi
Focus Adjustment	Fixed focus laser (adjust focus by adjusting the height of the laser)