Xtralis VESDA-E VES-A10-P User Manual

VESDA-EVES-A10-P Product Guide
www.xtralis.com 1
Table of Contents
1 Introduction 3
1.1 Features 3
2 Product Information 5
2.1 Detector Components 5
2.2 How the VES-A10-P works 5
2.3 Front Panel 6
2.4 Internal Buttons 9
2.5 Communication Ports 10
2.6 VESDAnet 10
2.7 Specifications 11
2.8 Dimensions 13
3 Pipe Network Design and Installation 17
3.1 Design Considerations 17
3.2 Installation Considerations 17
3.3 Pipe Inlets 17
3.4 Managing the Exhaust Air 18
4 Installation 19
4.1 Prepare the Detector 19
4.2 Mounting 20
4.3 Wiring 35
4.4 Powering Up 43
4.5 Installation Checklist 44
4.6 Preliminary System Check 45
5 Configuration 47
5.1 Communication between Xtralis VSC and the detector 47
5.2 Connecting to the Detector 51
5.3 Authentication 54
5.4 Commands 55
5.5 Configuration Options 58
5.6 Factory Default Settings 73
6 Commissioning 77
6.1 AutoLearn Smoke 78
6.2 AutoLearn Flow 79
6.3 Commissioning Smoke Test 79
7 Maintenance 81
7.1 Standby 81
7.2 Open the Door 82
7.3 Replacing the Filter 83
7.4 Remove the Fascia 86
7.5 Replacing the Aspirator 88
7.6 Replacing the Smoke Detection Chamber 90
7.7 Replacing the Sampling Module 95
7.8 Replacing the Ultrasonics Flow Sensing and Scanning Module 100
7.9 Spare Parts 103
8 Troubleshooting 105
8.1 Fault Reporting through Relays 105
8.2 Troubleshooting with the Front Panel Display 105
8.3 Troubleshooting with Xtralis VSC 106
9 Product Security Advice 107

Xtralis VESDA-E VES-A10-P Specifications

General

Brand	Xtralis
Model	VESDA-E VES-A10-P
Category	Smoke Alarm
Language	English