VESDA by Xtralis VESDAVLSProduct Guide
www.xtralis.com 35
10 Preliminary Systems Check
A preliminary systems check is required after installing the VESDA VLS detector, before it is commissioned
for use. The check can be conducted by connecting the detector to a LCD Programmer or using Xtralis VSC
PC based software. The preliminary systems check includes:
l Conducting a VESDAnet communications check
l Selecting pipes in use
l Accepting factory default configurations, or changing to site requirements
l Normalizing the air flow
l Conducting a basic pass/fail smoke test
l For details on preliminary systems check refer to the LCD Programmer or the relevant software
manuals
Refer to the VESDA LCD Programmer and Commissioning Guides for further details.
To Next Page
Loading...
