17
MAINTENANCE
(INSTRUCTIONS CONTINED)
• Thoroughly clean the cover, cover O-ring, and sealing surface. Apply grease to the O-ring
using a silicone-based lubricant.
• To reinstall the lid, place it on the pot, ensuring the correct positioning of the lid O-ring.
• Securely fasten the lid by turning it clockwise until the handles are horizontal or fully
hand-tightened.
(INSTRUCTIONS CONTINED)
• Open the valves in the suction and outlet pipes.
• Turn the power "ON" at the house circuit breaker and reset the pool time clock to the correct
time.
• Start the pump, and ensure you are standing clear of the filter.
• Observe for a steady stream of water comes out.
This filter operates under high pressure. Whenever any part of the circulating
system (such as the Lock Ring, Pump, Filter, Valves, etc.) undergoes servicing,
there is a possibility for air to enter the system and become pressurized.
Pressurized air can lead to the lid separating, posing a significant risk of severe
injury, death, or property damage. To prevent this potential hazard, it is crucial to
adhere to the following instructions:
DANGER
To Next Page
Loading...
