EasyManua.ls Logo

Xylem SI Analytics ViscoClock plus - Start Measurement

Xylem SI Analytics ViscoClock plus
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
48
(b) on silicone plug (8S) above the capillary tube (22) for suction operation (see Fig. 9)
Fig. 9 Suction mode liquid handling with manual pump VZ 6554
The suction operation with manual pump VZ 6554 (optional accessory, not included in the scope of
delivery), is recommended especially for aggressive liquids which must never enter the thermostat bath
inadvertently. Furthermore, this operating mode is recommended for foaming samples.
3.9 Start measurement
Remove the adapter (28) of the manual pump.
Considering that the measurement liquid will immediately start flowing down, the <START>
key (16) must be pressed immediately!
16
8S

Related product manuals