61
• Error during setting up of USB drives
Error code Display message Errors Description Remedy
not supported
USB drive
supported
connected, but only one
is supported
medium
0x02000E21
…24
USB connection
failed
Error when
installing USB
drives to
the USB host
interface
Internal USB interface
error
Reconnect the USB
drive or restart the unit.
Format the USB drive if
necessary (FAT16/32)
0x02000E25
…27
reading/opening of the
0x02000E28
…E29
Printer has incorrect
device ID
Use a compatible printer
0x02000E2A
Printer cannot be
initialized
Disconnect the printer,
restart and reconnect it
0x02000E2B
neither a USB drive nor
Use compatible USB
drives
0x02000E11-
0x02000E1B
Error when
installing USB
drives to the
USB OTG
interface
Analog to host
(0x02000E21 -
0x02000E2B)
See above errors
• Error during printing and PDF generation
Error code Display message Errors Description Remedy
connected
connected
recognized to save as
PDF file or printer to
print the measuring
results
USB drive (memory
medium / printer)
print/save
internal memory
or a printer is connected,
but no measured values
are available to output
measurement to fill the
memory with measured
values
0x02001011
…12
Failed to print/
save PDF
Error during
creation/saving
of the PDF
document
The saving, creation or
writing of the PDF
document to a USB
drive has failed
Reconnect the USB
drive or restart the unit.
Format the USB drive if
necessary (FAT16/32)
0x02001014
0x02001015
…17
Error while
printing
Sending of commands
to the printer failed
Disconnect the printer,
restart and reconnect it.
Restart the ViscoClock
plus if necessary
(Disconnect the Power
supply from the DC
socket and then
reconnect it)