35
In the Power On Standby mode, plug in the power supply, and the Power LED on the
projector will light up. You need to press the power button to turn on the projector.
If switched to Power On, the machine will automatically turn on after plugging in the
power cord.
1. Press the power button on the projector or remote controller, then press OK key to
power off the projector.
2. Unplug the power cord of the projector.
3. Cover the lens and store the projector in a cool and dry place.
4.If you are unable to cover the lens, please adjust the lens forward or backward by
pressing the F+ and F- buttons on the remote control before shutting down.
9. Power On Mode
10. Safe Shutdown
Step1: Use
HDMI cable
to connect to XBOX/PS5
Step2: Choose the media signal channel : “
HDMI
”
Step3: Succeed
Step1: Use HDMI cable to connect to DVD player
Step2: Select “HDMI” mode for connection
Step3: Enter Menu key
Step4: Change the PC mode from [On] to [Off] to avoid the risk of white pixel edges in
the image.
④
Connecting with XBOX/PS5
⑤
Connecting with DVD player:
To Next Page
Loading...
