Yaesu FTDX3000 Setup

Change item #75 to USB, which tells the radio to source TX audio from the USB audio
interface.
The next two items #76 and #77 is the gain settings internal to the radio between the
internal sound card and the audio input of the transmitter and the audio output of
the receiver. These are the values which work best for me.

Yaesu FTDX3000 Specifications

General

Antenna Impedance	50 Ohms
Type	HF/50 MHz Transceiver
Supply Voltage	13.8 V DC ±15%
Antenna Connector	SO-239
IF DSP	Yes
Modes	AM, FM, RTTY
Receiver Type	Triple Conversion Superheterodyne
Display	4.3-inch TFT Full-Color