Yaesu VX-2R - Memory Recall and Home Channels

VX-2R OPERATING MANUAL38
MEMORY MODE
Memory Recall
1. While operating in the VFO mode, press the
[
V/M
]
key to enter
the Memory mode.
2. Rotate the DIAL knob to select the desired channel.
3. To return to the VFO mode, press the
[
V/M
]
key.
HOME Channel Memory
A special one-touch “HOME” channel is
available for each of operating bands, to
allow quick recall of a favorite operating
frequency /on each band.
Home Channel storage is simple to ac-
complish:
1. Select the desired frequency, while
operating in the VFO mode. Be sure
to set up any desired CTCSS or DCS
tones, as well as any desired repeater
offset. The power level may also be
set at this time, if you wish to store it.
2. Press and hold in the
[
F/W
]
key for one second.
3. While the memory channel number is blinking, just press the
[
HM/RV
]
key. The fre-
quency and other data (if any) will now be stored in the special HOME channel regis-
ter.
4. You may repeat this process on the other operating bands.
5. To recall the HOME channel, press and
hold in the
[
HM/RV
]
key for one second
while operating either in the VFO or MR
mode.
The UHF HOME channel is the
one used during “Emergency” operation. See page 31 for details regarding
this feature.
REGULAR MEMORY CHANNEL OPERATION
BAND
FREQUENCY
USA VERSION EXP VERSION
BC Band 0.540 MHz 0.540 MHz
SW Band 1.800 MHz 1.800 MHz
50 MHz Ham Band 30.000 MHz 30.000 MHz
FM BC Band 59.000 MHz 88.000 MHz
Air Band 108.000 MHz 108.000 MHz
144 MHz Ham Band 146.520 MHz 144.000 MHz
VHF-TV Band 174.000 MHz 174.000 MHz
Action Band 1 230.000 MHz 230.000 MHz
430 MHz Ham Band 446.000 MHz 430.000 MHz
UHF-TV Band 470.000 MHz 470.000 MHz
Action Band 2 860.000 MHz 860.000 MHz
DEFAULT HOME CHANNELS
USA Version EXP Version