12
Using for the first time
Arm and disarm the system and practice using it. Trigger the alarm by arming the system
and opening protected doors/windows and walking past PIR’s. Now’s the time to show
the rest of the family how simple it is to use.
5
Arming
Press Arm on the keyfob for at least 1 second.
The delay is designed to prevent accidental
operation. The siren will respond by beeping once
and the LEDs flashing.
Disarm
Press Disarm on the keyfob for at least 1
second. The siren will respond by beeping twice
and the LEDs flashing from side to side.
Panic
Press the Panic button for 3 seconds, the
keyfob LED will flash and the siren will sound and
flash.
Stopping the alarm
If the siren is sounding and the strobe flashing:
Press Disarm on the keyfob.
• The on/off switch at the side prevents the
keyfob from transmitting accidentally.
• The Home button is not operational in this
system.
To Next Page
Loading...
Need help?
General
