17
P/N -220- - Rev FAYRD INST FUL
*The Master code must be registered prior to any other programming of the lock.PIN
Privacy Button Setting
Handing the Lock
Performs automatic
handing of the lock
Continue
Complete
Continue
Complete
Master Code SettingPIN
M
User Code RegistrationPIN
Register
Delete
Advanced Lock Settings
Volume Setting
Language Setting mode
Lockout Mode
**Network Module Setting
Join the network
Enable
Disable
Exit the network
User Number ( )UN
1~25: without network module
U
**This function only appears when a
Network Module installed.
*Automatic Re-lock
Enable
Disable
Inside Indicator Light
One Touch Locking
Enable
Disable
Enable
Disable
Default settings
in bold.
English
Spanish
French
3
M
1
2
Silent
Low
High
Continue
Complete
1~250: with network module
Enable
Disable
1. Touch screen with back of hand or palm to activate.
2. Enter 4-8 digit master code* followed by key.PIN
Lock Response: "Menu mode, enter number, press key to continue."
3. Enter digit corresponding to the function to be performed followed by the key.
Follow the voice commands.
Feature Programming Through Menu Mode
Using Master code*PIN
*This feature is available with certain
Z-Wave and ZigBee controllers when
a Network Module is used.
To Next Page
Loading...
