3. Run the engine until it stops, then turn the key switch to
the OFF position if truck is equipped with key switch, or
press the Power ON/OFF button if truck is equipped with
keyless start option.
4. Disconnect the quick-disconnect fitting on the LPG tank.
See Figure 43.
5. Push in the bracket release pin, grab the bracket handle,
and swing the tank and bracket out to the side of the lift
truck. If your truck is equipped with a swing out and drop
down LPG tank bracket , drop the tank down to the side of
the truck for ease of removal.
6. Unlatch the tank strap and remove the LPG tank from
the bracket.
Maintenance
169
To Next Page
Loading...
Need help?
General
