fibers (paper, wood, cotton, agricultural grass/grain, etc).
Remove all foreign materials.
• Coolant level in the cooling system and condition of the
drive belts.
• Condition of the radiator and screen. Clean if necessary.
• Fuel level.
• Oil level in the engine.
• Oil level in the hydraulic tank.
• Leaks from the engine, transmission, hydraulic system,
and fuel system.
• Loose or missing hardware.
• Check transmission oil level.
Operator Checklist
If your lift truck is equipped with the optional operator
checklist, it can be enabled or disabled by a supervisor or
service technician.
The operator checklist will appear on the LCD screen after
the lift truck has been powered ON and operator has
entered the correct password, if the password function is
activated. If password function is not activated, operator
checklist appears after lift truck is powered ON.
The operator checklist can store a maximum of 30 items.
Each item includes a text description of a system or com-
ponent the operator is to check. The operator is instructed
to press button #1 for YES or button #2 for NO on the Dis-
play Switch Cluster. See Figure 6.
If any checklist item is answered with a NO response, the
checklist item will be repeated. If a NO response is given
again, the checklist item will be logged into the Checklist
Log as a FAIL. When the checklist fails due to a NO
answer, the display stops changing. No additional checklist
items are shown.
Once the checklist has been completed and all items were
answered with YES, the operator can start the lift truck. If
there were any NO
answered to checklist items, the truck
may or may not start. The lift truck can be set up to not start
(starter, engine outputs, transmission and hydraulic func-
tions disabled) if any item in the checklist is answered with
a NO response. If lift truck is configured this way, the mes-
sage "Truck Disabled" will appear on the first line of the
LCD screen and the message "Checklist Failed" will appear
on the second line. The lift truck will stay disabled and
Operating Procedures
68
To Next Page
Loading...
Need help?
General
