3. Disconnect the straps or chains.
4. Remove the wheel blocks.
5. Check that all switches and accessories are turned OFF.
6. Unload the lift truck.
Preparation for Use
After being transported or stored, the lift truck must be pre-
pared for use for proper operation. All problems must be
corrected before use of the lift truck, see the Service Man-
ual for procedures.
Preparation After Transport
1. Complete the unloading procedures.
2. Inspect the lift truck for damage and missing compo-
nents.
3. Follow the steps in the section How to Make Checks
With the Engine Stopped.
Maintenance
202
To Next Page
Loading...
