WARNING
Wheels must be changed and tires repaired by trained
personnel only.
Always wear safety glasses.
1. Put the wheel rim on the
bed of the press. Put the
cage in position on the tire.
Use the press to push the
tire away from the side
flange.
2. Put the tire tool into the
slot between the lock ring
and the wheel rim. Remove
the lock ring and side flange.
3. Turn the tire over. Put a
support under the wheel rim.
Make sure the wheel rim is at
least 150 to 200 mm (6 to
8 in.) from the bed of the
press.
Maintenance
191
To Next Page
Loading...
