EasyManua.ls Logo

Yamaha 2A - Gasoline (Petrol) and Oil Mixing

Yamaha 2A
111 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E
3-6
While many additives available may
reduce deposits, Yamaha recommends
the use of Ring Free Fuel Additive, avail-
able from your Yamaha dealer. Ring
Free has repeatedly proven its ability to
clean combustion deposits from inside
the engine, notably the critical piston-
ring-land area, and fuel system compo-
nents. Follow product labeling for use
instructions.
EMF35010
GASOLINE (PETROL) AND OIL
MIXING
Pre-mix model
1) Pour oil and gasoline into the fuel
tank, in that order.
1 Oil 2 Gasoline (Petrol)
2) Then mix the fuel thoroughly by
shaking.
3) Make sure the oil is mixed with gaso-
line.
Oil : Gasoline (Petrol)
Break-in period 1 : 25
After break-in 1 : 100
cC
8 Avoid using any oil other than the des-
ignated type.
8 Use a thoroughly blended fuel-oil mix-
ture.
8 If the mixture is not thoroughly blend-
ed, or if the mixing ratio is incorrect,
the following problems could occur:
Low oil ratio:
Lack of oil could cause major engine
trouble, such as piston seizure.
High oil ratio:
Too much oil could cause fouled
spark plugs, smoky exgaust, and
heavy carbon deposits.
902034*
q
w
6A1-9-1L 3 4/20/01 11:59 AM Page 7

Table of Contents

Related product manuals