3-27
E
EMH60010
CRUISING IN OTHER
CONDITIONS
CRUISING IN SALT WATER
After operating in salt water, wash out
the cooling-water passages with fresh
water to prevent them from becoming
clogged-up with salt deposits.
NOTE:
Refer to cooling system flushing instruc-
tions in “TRANSPORTING AND STORING
OUTBOARD MOTOR”.
CRUISING IN TURBID WATER
It is strongly recommended that the
optional chromium-plated water-pump
kit be installed if the outboard is to be
used in turbid (muddy) water conditions.
6A1-9-1L 3 4/20/01 11:59 AM Page 28
To Next Page
Loading...
