3-30
E
EMG63210
PROCEDURE FOR TILTING UP
Power trim and tilt model
1) Remove the fuel-line connection from
the motor.
UP
DN
701034
UP
DN
302013*
DN
UP
403011
2) Push the power trim and tilt switch
“UP” until the outboard has tilted up
completely.
3) Turn the tilt-support lever toward
engine bracket and support the
engine.
w
After tilting the engine, be sure to sup-
port it with the tilt-support lever. Other-
wise, the engine could fall back down
suddenly if oil in the power trim and tilt
unit should lose pressure.
63B-9-19-3B (E) 4/18/01 11:39 AM Page 13
To Next Page
Loading...
