The 9000Pro “Functions”
158 Reference
The 9000Pro “Functions”
The 9000Pro “Function” mode includes 8 groups of functions that access a number of parameters related
to overall 9000Pro operation.
The operations for each function corresponding to step #3 are covered in the following
explanations.
The Function mode has the following display pages:
• MASTER TUNE/SCALE TUNE Master Tuning/Scale Tuning ..................................158
• SPLIT POINT/FINGERING Split Point/Fingering settings.................................159
• CONTROLLER Controller assignment (Foot controller/Keyboard/
Modulation Wheel function)...................................159
• REGISTRATION/FREEZE/VOICE SET Registration/Freeze Group/Voice Set settings ......163
• HARMONY/ECHO Harmony/Echo settings.........................................164
• VIDEO OUT Video monitor settings...........................................165
• TALK SETTING Talk setting (Vocal Harmony and the microphone
sound settings)......................................................165
• UTILITY Utility settings........................................................166
Master Tuning/Scale Tuning
The explanations here apply to step #3 of the Basic Procedure above.
Basic Procedure
DISK
/
SCSI
MIDIFUNCTION
MENU
A
B
C
D
E
F
G
H
I
J
3 Set the parameters of
the selected function.
1 Press the [FUNCTION]
button.
2 Select the desired function.
■ Master Tuning
Tune the overall pitch of the 9000Pro from
414.6 - 466.8 Hz (referenced to A3).
A3 = 440 Hz is standard “concert” pitch.
■ Scale Tuning
The current tuning of
each note is shown in the
corresponding key.
This allows you to store
four different Scale Tuning
settings to Multi Pad bank
#60. This convenient fea-
ture lets you change Scale
Tuning settings while you
are playing, simply by
pressing the appropriate
Multi Pad.
Preset (factory set) data is
listed in the chart below.
Select either the normal equal temperament
scale or an “arabic” scale in which each note
can be tuned over a 127-cent range.
When the ARABIC scale is selected, you can select
the note and tune it . The tuning range is from “-64”
through “0” to “+63”. Each increment equals one
cent (one “cent” is one hundredth of a semitone).
Fine-tune the selected note in 1-cent steps.
Coarse-tune the selected key in 10-cent steps.
[NEXT]
[BACK]
CC# DD# EFF# GG# AA# B
Pad1 RASD Up 0 0 0 0 -50 0 00000-50
Pad2 RASD Down 0 0 0 0 -50 0 000000
Pad3 BAYATI 0 0 0 0 -62 0 000000
Pad4 Equal Tem-
perament
000000000000
156
To Next Page
Loading...
Need help?
General
