Auto Accompaniment
Auto Accompaniment
74 Reference
Style Manager
The 9000Pro styles are divided into two groups : Preset styles and Flash styles.
Flash styles pre-recorded to Flash styles I through VIII can be replaced by the desired data
with the Style Manager function.
The operations for each function corresponding to step #4 are covered in the following expla-
nations.
■ Load Style into Flash ROM
This allows you to load style data from disk to Flash ROM.
Basic Procedure
Style Manager
Flash Styles
in
Flash ROM
Disk Styles
Save
Load
Since all Flash style data is stored to Flash ROM, any data in the selected Flash style location will be erased and replaced by
your new settings. This includes the factory programmed Flash style data (Flash styles I through VIII). If you've deleted the
factory-set data, you can use the Restore function (page 154) to load a copy of it from the included disks (page 6).
For details about Flash ROM, refer to "Memory Structure" on page 54.
3Select the desired function.
1Select a style
category.
4Execute the selected function.
2Select this to call up the
Style Manager display.
If an optional SCSI
device is connected or
the optional internal hard
disk is installed, select
the appropriate device.
See page 150 for details.
You can select the desired location
in Flash ROM as the destination.
See "CAUTION" on page 151.
Choose one of the three methods
for selecting files (see page 151).
Select this to listen to the selected
style file.
When set to “with OTS”, you can
load the selected style file with its
One Touch Setting setups.
Select this to display the property of
the selected file.
NEXTBACK
PAGE CONTROL
See page 151 for details
on directory/file selection.
72
To Next Page
Loading...
Need help?
General
