8-43
1. Adjusting bolt 2. Locknut a. 3 ~ 5 mm
1. Boulon de réglage 2. Contre-écrou
1. Perno de ajuste 2. Contratuerca
EBU00303
Valve clearance adjustment
The correct valve clearance changes with use, re-
sulting in improper fuel/air supply or engine noise.
To prevent this, the valve clearance must be ad-
justed regularly. This adjustment however, should
be left to a professional Yamaha service techni-
cian.
EBU00307
Throttle lever adjustment
NOTE:
Adjust the engine idling speed before adjusting the
throttle lever free play.
1. Loosen the locknut.
2. Turn the adjusting bolt until the throttle lever
free play is 3 ~ 5 mm.
3. Tighten the locknut.
EE.book Page 43 Monday, June 25, 2001 2:27 PM
To Next Page
Loading...
