8-45
1. Brake pad a. Wear limit: 1 mm
1. Plaquette de frein a. Limite d’usure: 1,0 mm
1. Pastilla del freno a. Límite de desgaste: 1,0 mm
1. Wear indicator 2. Wear limit
1. Indicateur d’usure 2. Limite de usure
1. Indicador de desgaste 2. Límite del freno
EBU00312
Front brake pad inspection
Inspect the brake pads for damage and wear. If
the thickness is less than the specified value, have
a Yamaha dealer replace the pads.
NOTE:
The wheels need to be removed to inspect the
brake pads. See page 8-67 for removal proce-
dures.
EBU00313
Rear brake shoe inspection
A wear indicator is provided on the rear brake.
This indicator allows checking of brake shoe wear
without disassembling the brake. Apply the rear
brake and check the position of the indicator. If the
indicator reaches the wear limit line, ask a
Yamaha dealer to replace shoes as a set.
EE.book Page 45 Monday, June 25, 2001 2:27 PM
To Next Page