8-55
1. Locknut 2. Adjusting bolt
1. Contre-écrou 2. Boulon de réglage
1. Contratuerca 2. Perno de ajuste
1. Brake cable adjusting nut a. 0 ~ 1 mm
1. Écrou de réglage du câble de frein
1. Tuerca de ajustado del cable de freno
Brake lever
1. Loosen the locknut and fully turn in the ad-
justing bolt on the handlebar.
2. Turn the adjusting nut on brake cable to pro-
vide a gap of 0 ~ 1 mm between the cam
shaft lever and pin.
EE.book Page 55 Monday, June 25, 2001 2:27 PM
To Next Page