8-57
1. Locknut 2. Adjusting bolt a. 5 ~ 8 mm
1. Contre-écrou 2. Boulon de réglage
1. Contratuerca 2. Perno de ajuste
3. Turn the adjusting bolt until free play reaches
5 ~ 8 mm at the lever pivot.
4. Tighten the locknut.
WARNING
Operating with improperly serviced or adjust-
ed brakes could cause loss of braking ability,
which could lead to an accident.
After servicing:
●
Make sure the brakes operate smoothly
and that the free play is correct.
●
Make sure the brakes do not drag.
Replacement of brake components re-
quires professional knowledge. These pro-
cedures should be performed by a Yamaha
dealer.
EE.book Page 57 Monday, June 25, 2001 2:27 PM
To Next Page