29 En
English
TROUBLESHOOTING
ADDITIONAL
INFORMATION
■ USB
Note
If a transmission error occurs but no status message is displayed on the front panel display of the receiver, check the connection between
the CD player and the USB device (☞p.10).
Status message Cause Remedy
See
page
NO USB
The USB device is not connected. Connect a playable USB device.
10
OVER CURRENT
The USB device is either unplayable on
this system or connected at an incorrect
angle.
Disconnect the USB device. Change the input source
to a device other than USB and back to USB. Then,
correctly connect a playable USB device to the CD
player.
—
To Next Page
Loading...
