• VOLTAGE SELECTOR
(Asia and General models only)
Caution
The VOLTAGE SELECTOR on the rear panel
of
this unit
must be set for your local voltage BEFORE plugging the
power cable into the AC wall outlet. Improper setting
of
the VOLTAGE SELECTOR may cause damage to this
unit and create a potential fire hazard.
Rotate the VOLTAGE SELECTOR clockwise or
counterclockwise to the correct position using a straight
slot screwdriver.
Voltages are as follows:
........................ AC I 10/120/220/230-240
V,
50/60 Hz
Voltage indication
VOLTAGE
SELECTOR
• Connecting
the
power cable
Plug the power cable into the AC
IN
connector when all
connections are complete, and then plug
in
the power
cable to the AC outlet.
16
En
To Next Page
Loading...
