Yamaha CD-C603 User Manual (English)

Questions and Answers:

M
mwilliamsAug 18, 2025
What to do if my Yamaha CD-C603 CD Player won't play the disc?
- M
  Melanie BrooksAug 19, 2025
  If your Yamaha CD Player is unable to play the inserted disc, consider the following possibilities: * The disc may be scratched: Try using a different disc. * There might be condensation on the lens inside the unit: Turn on the power and wait 20-30 minutes before attempting to play the disc again. * The disc may be inserted incorrectly: Make sure the disc is placed with the label side up. * The disc may be dirty or scratched: Clean the disc surface or try an unscratched disc. * The disc format may not be supported: Ensure the disc contains files in a format supported by the unit. * The disc type may not be supported: Verify that the unit supports the type of disc you are using. * The unit might be in USB mode: Press the CD/USB button to switch to Disc mode.
R
Richard LarsonAug 21, 2025
Why is there no sound coming from my Yamaha CD-C603?
- N
  Nicholas YatesAug 21, 2025
  If there is no sound coming from your Yamaha CD Player, the unit may not be connected to the amplifier properly. Check the connection to the amplifier.
H
Herbert FranklinAug 23, 2025
Why is my Yamaha CD-C603 CD Player remote not working?
- D
  daniel43Aug 23, 2025
  If the remote control for your Yamaha CD Player isn't working, there are several possible reasons: * The batteries may be weak: Try replacing all the batteries in the remote. * You may be using it outside of its operational range or at an incorrect angle: Ensure you are within the specified range and angle for the remote to function properly. * There may be interference with the remote control sensor: Reposition the lighting or the unit if direct sunlight or certain types of lighting are affecting the sensor.
S
Stephanie SmithAug 26, 2025
How to turn on Yamaha CD-C603 if the power button doesn't work?
- C
  collinsbrianAug 26, 2025
  If pressing the power button on your Yamaha CD Player doesn't turn it on, the power cord may not be properly plugged in. Make sure to connect the power cord firmly to the AC outlet.
M
Mrs. Kelly YoungAug 28, 2025
Why does the sound skip on my Yamaha CD-C603 CD Player?
- L
  Lisa GarciaAug 28, 2025
  If the sound skips on your Yamaha CD Player, it could be due to a few reasons: * The unit might be affected by vibration or impact: Try changing the location of the unit. * The disc may be dirty or scratched: Wipe off any dirt from the disc surface, or try using an unscratched disc.
G
georgedayAug 30, 2025
Why can't my Yamaha CD Player play music from a USB drive?
- P
  powensAug 30, 2025
  If your Yamaha CD Player can't play music files from a USB flash drive, here are a few possible reasons: * The USB flash drive may not be properly connected: Ensure the USB flash drive is correctly connected to the unit. * The file format may not be supported: Make sure the USB flash drive contains files in a format supported by the unit. * The unit may be in Disc mode: Press the CD/USB button to switch to USB mode.
L
Laura WalkerSep 1, 2025
How to fix buzzing or humming noise from Yamaha CD Player?
- W
  williamsanthonySep 1, 2025
  If you hear a buzzing or humming noise from your Yamaha CD Player, the RCA stereo cable might not be connected firmly. Connect the RCA stereo cable firmly. If the issue persists, check the cable for defects.
C
Christina PageSep 4, 2025
Why does my Yamaha CD-C603 keep going into Standby mode?
- S
  Steven GibsonSep 4, 2025
  Your Yamaha CD Player might be entering Standby mode because you haven't interacted with it for a while after playback stopped, and the Auto Power Standby function has activated. You can disable the Auto Power Standby function to prevent this.
S
Shawn KlineSep 6, 2025
What to do if Yamaha CD-C603 CD Player playback doesn't start correctly?
- N
  nicolehallSep 6, 2025
  If playback on your Yamaha CD Player doesn't start immediately or from the correct point, the disc may be dirty or scratched. Clean the disc surface or use an unscratched disc.
S
Scott ShieldsSep 8, 2025
Why is there no audio output from the digital output jack on my Yamaha CD-C603?
- J
  Jason WellsSep 8, 2025
  If there's no audio output from the digital output jack on your Yamaha CD Player, the PURE DIRECT function might be turned on. Turn the PURE DIRECT function off.

Yamaha CD-C603 Specifications

General

Type	CD Player
Playable Discs	CD, CD-R, CD-RW
Standby Power Consumption	0.5 W
Frequency Response	2 Hz-20 kHz
Output Level	2.0V
Digital Audio Output	Optical
Output Voltage	2.0V