Yamaha CL3 Installation Guide

CL Editor Installation Guide 6
When you connect the computer to the CL through a dedicated
network
• Settings of the CL
You can use the following initial settings.
• Settings of the computer
We recommend that you make the following settings.
When you connect the computer to the CL in the existing network
Make the network settings of the CL and your computer in accordance with your LAN. Please contact your network
administrator for further details. For specific instructions and caution for connecting the CL to LAN, please refer to
the following web site:
http://www.yamahaproaudio.com/
• Settings of the CL
Network Settings
IP address 192.168.0.128
Gateway address 192.168.0.1
Subnet mask 255.255.255.0
IP address 192.168.0.100
Subnet mask 255.255.255.0
Default gateway (Router) 192.168.0.1
IP address Set the IP address so that it does not conflict with the IP address of any other device on
the network.
Gateway address Set the IP address of the gateway when the gateway exists. Set the vacant address
when the gateway does not exist. The address should be set in the same subnet as IP
address within LAN in which the subnet is set.
Subnet mask Set the subnet mask of the subnet connected to the CL.

Yamaha CL3 Specifications

General

DJ mixer	-
Product color	Black
Video capability	No
Frequency range	20 - 20000 Hz
Channels quantity	72 channels
Signal delay (@48kHz)	2.5 ms
Supported sample rates	44.1, 48 kHz
Digital sound processing	- bit
Power consumption (typical)	170 W
USB 2.0 ports quantity	1

Weight and Dimensions

Depth	667 mm
Width	839 mm
Height	299 mm
Weight	29000 g