61
Feature Reference
Utility Mode
n
You can also use the NUMERIC KEYPAD (0 ~ 9) and [ENTER] or the
ASSIGN 1/DATA knob to change the data value.
n
As you press other Parameter Value [UP/DOWN] buttons, the
corresponding parameters will appear in the LCD. Set all other
parameters to your preference.
n
To exit Utility mode press [PERFORMANCE] or [MULTI] to return to
Performance or Multi Play mode, respectively.
n
It is not necessary to store changes made in the Utility mode as the
CS2x will remember any changes you make.
● Description of Each Utility
Function
SYSTEM
This determines the tuning and other keyboard-related
settings for the CS2x tone generator. There are four
parameters: MASTER TUNE, KBD TRANS (Keyboard
Transpose), VEL CURVE (Velocity Curve) and VEL FIX
(Velocity Fix).
■ MASTER TUNE
This tunes the CS2x’s tone generator. The basic pitch is 440
Hz at note A3. Master tuning can be adjusted in 1 cent
increments and decrements.
Settings
MasterTune: -102 to 0 (A3=440 Hz) to +102
n
A value of 100 cents is equal to one semitone.
PERFORMANCE
MULTI
DEMO
STORE
UTILITY
MASTER
TUNE
KBD
TRANS
BANK
PROGRAM
Entering Utility Mode
Press [UTILITY] to enter Utility mode. A [▲] mark will appear
below the word “UTILITY” in the LCD to indicate Utility mode
is engaged.
n
When you enter Utility mode the LCD will display the screen
previously selected when you last exited Utility mode. The first time
you press the [UTILITY] button after turning the power on, however,
the LCD will display the SYSTEM MASTER TUNE screen.
● Procedure
1. Select the parameter.
Press the Parameter Value [UP/DOWN] button
corresponding to the parameter you want to edit once to
select the parameter. The name of the parameter and current
setting will display in the LCD.
2. Set the value.
Press [UP/DOWN] again to set the value. Holding the
Parameter Value [UP/DOWN] button changes the value
continuously. Holding [UP/DOWN] scrolls through the
settings. The [UP] button increases the value and the
[DOWN] button decreases the value.
PERFORMANCE
MULTI
DEMO
STORE
UTILITY
MASTER
TUNE
KBD
TRANS
BANK
PROGRAM
PERFORMANCE MULTI
DEMO
STORE UTILITY
Parameter Name
SYSTEM SETTINGS
MASTER TUNE
KBD TRANS
VEL CURVE
VEL FIX
MIDI SETTINGS
TRANS CH
RCV CH
DEVICE NO
LOCAL
BULK DUMP
CS2x CS2x
MIDI
ASSIGN CONTROL
CHANGER NUMBER
Utility Mode
In Utility mode you can set the CS2x system, MIDI and special assignment parameters.
cCS2x_Ref 12/10/98 5:12 PM Page 61
To Next Page
Loading...
Need help?
General
