RIVAGE PM7 System Setup Guide
41
Patching the output ports
This section explains how to patch output channels to the
output jacks to which the speaker system has been
connected in the “Connecting the devices” section.
NOTE
The PATCH screen displays the input/output jacks assigned to
the TWINLANe network.
1. Press the PATCH button on the menu bar in
the touch screen.
The PATCH screen will appear.
2. Press the OUTPUT tab.
3. Use the knob in the upper-right corner to
display the desired output jacks.
NOTE
If you press an on-screen knob that you want to control,
you will be able to operate the knob via the [TOUCH AND
TURN] knob.
If you select RY card slot 2 on the I/O rack (M1),
“M1/RY SLOT2” will appear.
4. Use the knob in the lower-left corner to
display the output channels.
5. Press the desired grid cell to patch a desired
channel.
For this example, press the grid cells on which the
output jacks (M1/RY SLOT2/1,2) intersect with
output channels (ST A L, R).
To Next Page
Loading...
Need help?
General
