Need help?Do you have a question about the Yamaha DSP-A1000 and is the answer not in the manual?
General| Number of Channels | 5 |
|---|---|
| Frequency Response | 20Hz to 20kHz |
| Type | AV Amplifier |
| Signal-to-Noise Ratio (IHF-A) | 100 dB |
| Total Harmonic Distortion | 0.015% |
| Damping Factor | 100 (8 ohms, 20Hz-20kHz) |
| Input Sensitivity | 150mV (line) |
| Channel Separation | 60 dB |
| Speaker Load Impedance | 4-16 ohms |
| Frequency Response Range | 20Hz to 20kHz |
| Signal to Noise Ratio | 100dB (IHF-A) |
Critical safety and service advisories for authorized personnel.
General guidelines and safety precautions for service technicians.
Detailed illustration and description of rear panel connections.
Technical specifications for the DSP-A1000 amplifier.
High-level functional block diagram of the amplifier's circuitry.
Visual guide to the internal components and layout.
Step-by-step instructions for disassembling the unit.
Procedures for calibrating specific parameters like idling current.
Instructions for activating and using the built-in test signal generator.
Explanation of the protection circuit and its activation conditions.
Detailed diagrams of component placement on various circuit boards.
Detailed circuit diagrams for different sections of the amplifier.
Pin assignments and functions for integrated circuits used in the unit.
Comprehensive list of electrical components.
List and diagrams of physical components like chassis and fasteners.
Schematic diagram and parts for the remote control unit.
To Next Page
