To Next PageTo Next Page
Need help?Do you have a question about the Yamaha DSP-A3090 and is the answer not in the manual?
General| Type | AV Amplifier |
|---|---|
| THD | 0.015% |
| Frequency Response | 20Hz - 20kHz |
| Channel Separation | 60 dB |
| Video Connections | Composite, S-Video |
| Signal-to-Noise Ratio | 100dB |
| Digital Inputs | Coaxial, Optical |
| Dimensions | 435 x 171 x 476 mm |
| Damping Factor | 80 |
| Input Sensitivity | 150mV |
| Surround Sound | Dolby Pro Logic |
Essential safety guidelines for operating the unit safely and correctly.
Guidelines for preventing damage due to heat, humidity, dust, shock, and improper use.
Instructions for unpacking the unit and installing remote control batteries.
Guidance on battery replacement, sensor operation, and control door usage.
Explanation of how DSP technology creates immersive audio environments.
Details on the Dolby Pro Logic Surround system for multi-channel sound.
Explanation of the AC-3 decoder for advanced multi-channel audio.
Combining Dolby Surround with Yamaha DSP for enhanced cinematic audio.
Using Pro Logic with digital sound fields for immersive theater sound.
Using AC-3 with digital sound fields for advanced home theater audio.
Guidance on setting up main, center, and surround speakers for optimal sound.
Visual guides and settings for 4, 5, 6, and 7 speaker systems.
Identification and description of buttons, knobs, and displays on the front panel.
Detailed explanation of each control and indicator on the front panel.
Further details on tone controls, selectors, and volume management.
Overview of the remote control's buttons and their primary functions.
Detailed descriptions of specific keys for level adjustment, program selection, and modes.
Identification of all input/output jacks and controls on the rear panel.
Detailed description of digital, analog, and speaker connection terminals.
Explanation of output jacks, power outlets, and voltage selector.
How to set switches like MAIN LEVEL and FRONT MIX for system configuration.
Important tips for correct cable connections and polarity.
Diagrams showing how to connect turntables, CD players, tuners, and tape decks.
How to connect digital sources via optical and coaxial cables.
Settings for center and rear speakers to optimize sound distribution.
Configuring main speaker output for bass response and subwoofer integration.
Setting how low-frequency effects (LFE) are routed to speakers or subwoofer.
Balancing levels of main, center, and effect speakers using test tones.
List of 13 customizable functions to optimize system performance.
Selecting output modes for different speaker system configurations.
Using test tone to adjust subwoofer level for optimal bass response.
Adjusting low frequency effects level and center channel audio delay.
Fine-tuning the center channel frequency response with a 5-band equalizer.
Adjusting tonal balance across main, center, and effect channels.
Configuring dynamic range settings, especially for AC-3 sources.
Resetting DSP program parameters to their default values.
Locking DSP parameters and other settings to prevent accidental changes.
Configuring VCR 3/DVD output for second monitor or recording.
Adjusting input levels for different sources to match CD source levels.
Setting default input modes for TV/DBS and VCR3/DVD sources.
Guide to selecting sources, setting volume, and adjusting audio parameters.
Steps for recording audio/video sources to tape or dubbing between tapes.
How to select from 12 DSP programs for various listening environments.
Selecting programs (10-12) for Dolby Pro Logic or AC-3 encoded video.
Description of 'Hall A', 'Hall B' in Europe for Concert Hall 1.
Description of 'Hall C' in Europe and 'Hall D' in USA for Concert Hall 2.
Descriptions for Concert Hall 3, Church, Rock Concert, and Jazz Club sound fields.
Details for Classical/Opera and Recital modes in Concert Video 1.
Details for Pop/Rock and Pavilion modes in Concert Video 2.
Mono Movie and Variety/Sports modes for TV programs.
Movie Theater 1 modes for video sources with Dolby Surround.
Movie Theater 2 modes for adventure and general film experiences.
Prologic/Normal, AC-3/Normal, Prologic/Enhanced, AC-3/Enhanced modes.
Explanation of sound fields, early reflections, and reverberations.
How to select and adjust parameters like TYPE and ROOM SIZE.
Adjusts the apparent size of the music venue by changing early reflection timing.
Adjusts delay between direct sound and first reflection, affecting apparent distance.
Changes apparent reflectivity of walls by adjusting early reflection decay rate.
Adjusts the time for dense reverberation sound to decay by 60 dB.
Adjusts delay and volume of reverberation sound for acoustic environment.
Performs fine adjustment of the level of all effect sounds.
Adjusts presence and surround initial delay, room size for sound fields.
Adjusts surround delay, room size, and wall reflectivity for surround sound fields.
Guide to programming the remote to control other devices.
How to erase single learned functions or all learned functions.
Solutions for power, hum, no sound, and distorted sound problems.
Resolving issues with DSP parameters, operation, recording, and noise.
Solutions for degraded sound with headphones and remote control malfunctions.
Technical details on RMS output power, dynamic power, and frequency response.
Specifications for input sensitivity, impedance, and signal-to-noise ratio.
Details on bass/treble controls, video signal types, and power supply.
Information on power consumption, AC outlets, physical dimensions, and weight.
