To Next PageTo Next Page
Need help?Do you have a question about the Yamaha DSP-AX2 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Input Impedance | 47 kOhms |
| Input Sensitivity | 200 mV |
| Video Connections | Composite, S-Video, Component |
| Speaker Impedance | 8 ohms |
| Amplifier Type | AV |
| Power Output | 100 W per channel |
| Signal to Noise Ratio | 100dB |
Covers initial steps like checking package contents and setting up the remote control.
Details the various buttons, displays, and ports on the unit and remote.
Explains different speaker setup configurations for optimal sound.
Guides on connecting various audio and video components to the unit.
Provides guidance on optimal placement of speakers for best sound performance.
Details the settings for various speaker configurations in the SET MENU.
Explains how to set speaker output levels using test tones for calibration.
Covers fundamental playback operations like power and source selection.
Instructions for recording sources using the REC OUT feature.
Overview and detailed descriptions of all SET MENU configuration options.
Explains advanced remote control functions like macros and learning.
How to adjust volume levels for individual effect speakers.
How to set the unit to turn off automatically after a specified time.
Explains the principles and types of digital sound field processing.
Explains the sound design principles and programs of CINEMA-DSP.
Details how to change and understand DSP sound field parameters.
Lists common problems and their solutions for the unit and remote.
Lists the technical specifications of the AV amplifier.
