EasyManua.ls Logo

Yamaha DSP-AX459 User Manual

Yamaha DSP-AX459
99 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SERVICE MANUAL
100998
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
CONTENTS
TO SERVICE PERSONNEL ...................................... 2–3
FRONT PANELS ........................................................ 3–5
REAR PANELS .......................................................... 5–9
REMOTE CONTROL PANELS .................................... 10
SPECIFICATIONS / 参考仕様 ................................ 11–12
INTERNAL VIEW ......................................................... 13
DISASSEMBLY PROCEDURES/分解手順 ......... 14–15
SELF DIAGNOSIS FUNCTION (DIAG)/
自己診断機能(ダイアグ)........................................ 16–37
AMP ADJUSTMENT/アンプ部調整 ........................... 38
DISPLAY DATA ..................................................... 39–40
IC DATA ................................................................. 41–50
PIN CONNECTION DIAGRAM .............................. 51–52
BLOCK DIAGRAMS .............................................. 53–55
PRINTED CIRCUIT BOARDS................................ 56–68
SCHEMATIC DIAGRAMS ...................................... 69–75
REPLACEMENT PARTS LIST .............................. 77–95
REMOTE CONTROL.............................................. 96–97
ADVANCED SETUP .................................................... 98
REPLACEMENT PARTS LIST FOR CARBON RESISTORS ....
99
P.O.Box 1, Hamamatsu, Japan
AV RECEIVER/AV AMPLIFIER
RX-V459/HTR-5940/DSP-AX459
HTR-5935
RX-V459/HTR-5940/DSP-AX459
HTR-5935
2006 All rights reserved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
'06.02

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Yamaha DSP-AX459 and is the answer not in the manual?

Yamaha DSP-AX459 Specifications

General IconGeneral
Channels5.1
TypeAV Receiver
HDMINo
Component video inputYes
Surround SoundDolby Digital, DTS
TunerAM/FM
Frequency Response10 Hz - 100 kHz (+0, -3 dB)
Input Sensitivity200 mV
Signal-to-Noise Ratio100 dB
Digital audio inputOptical x2, Coaxial x1
Inputs2 x Optical, 1 x Coaxial
Speaker TerminalsBinding Post
Power Output100 W per channel (8 ohms, 20 Hz - 20 kHz, 0.09% THD)
Output Power per Channel100 W (8 ohms, 20 Hz - 20 kHz, 0.09% THD)

Summary

To Service Personnel

Critical Components & Safety Procedures

Details on critical components and safety procedures for servicing the product.

Leakage Current Measurement

Procedure for verifying proper insulation and measuring leakage current after service.

Chemical Content & Solder Warnings

Warnings regarding hazardous chemicals and lead-free solder usage.

Front Panels

RX-V459 Front Panel Layouts

Diagram of front panel controls for RX-V459 models (U, C and R, T, K, A, G, E, L).

HTR-5940 & DSP-AX459 Front Panel Layouts

Diagrams of front panel controls for HTR-5940 and DSP-AX459 models.

Rear Panels

RX-V459 Rear Panel Configurations

Diagrams of rear panel connections for RX-V459 models (U, C, R).

RX-V459 Rear Panel Configurations

Diagrams of rear panel connections for RX-V459 models (T, K, A).

RX-V459 Rear Panel Configurations

Diagrams of rear panel connections for RX-V459 models (G, E, L).

HTR-5940 & DSP-AX459 Rear Panel Configurations

Diagrams of rear panel connections for HTR-5940 and DSP-AX459 models.

Remote Control Panels

RAV322 & RAV323 Remote Controls

Layouts of RAV322 and RAV323 remote control panels.

RAV307 & RAV308 Remote Controls

Layouts of RAV307 and RAV308 remote control panels.

Specifications

Audio and General Specifications

Detailed specifications for audio section, general features, power, and dimensions.

Video, FM, and AM Tuner Specs

Specifications for video signal levels and FM/AM tuner frequency ranges.

Internal View

Internal Component Identification

Diagram showing the location of internal PCBs and components within the unit.

Disassembly Procedures

Top Cover and Front Panel Removal

Step-by-step instructions for removing the top cover and front panel unit.

PCB Removal Steps

Detailed steps for removing various PCBs like FUNCTION, DSP, and OPERATION.

Self Diagnosis Function (DIAG)

DIAG Mode Overview and Operation

Introduction to self-diagnosis functions, menu items, and starting procedures.

Starting and Canceling DIAG Procedures

Procedures for entering DIAG mode and canceling it, including protection cancel.

Analyzing DIAG Displays and Menu Details

Understanding DIAG display messages, protection history, and key menu functions.

Amp Adjustment

Idling Current Confirmation

Procedure to confirm and adjust the idling current of the MAIN (1) P.C.B.

Related product manuals