Yamaha DSP-AX630SE User Manual

20
Item
1A CENTER
1B MAIN
1C REAR LR
1D REAR CT
1E BASS
1F MAIN Lv
Description
Sets center speaker availability and size.
Sets main speaker size.
Sets rear L/R speakers availability and size.
Sets rear center speaker availability and size.
Sets the speaker(s) to be used to output low bass signals.
Sets the main speaker level.
Possible settings (default
setting indicated in bold)
LRG/SML/NON
LARGE/SMALL
LRG/SML/NON
LRG/SML/NON
SWFR/MAIN/BOTH
Nrm (Normal)/–10 dB
SPEAKER MODE SETTINGS
This unit has 6 SPEAKER SET items on the SET MENU that you must set according to the number of speakers in your
configuration and their size. The following table summarizes these SPEAKER SET items, and shows the initial settings
as well as other possible settings.
If the initial settings shown in the following table are not appropriate for your speaker configuration,
see “1 SPEAKER SET” on pages 43-45 to change the settings.
Summary of SPEAKER SET items 1A through 1F
0104V630_19-22_EN(GB) 1/11/02, 7:40 PM20

Yamaha DSP-AX630SE Specifications

General

Type	AV Receiver
Audio Channels	6.1
Total Harmonic Distortion (THD)	0.06%
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Signal to Noise Ratio	100 dB
Tuner Section	FM/AM
Surround Sound Formats	Dolby Digital, DTS
FM Sensitivity	1.0 µV
Video Section	Composite Video, S-Video
Dimensions	435 x 171 x 421 mm
Amplifier Section	Discrete